> >
15.07.2013 The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communication. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus master or slave to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices.
Features and Benefits
- Support for both EtherNet/IP adapter and scanner
- Effortless configuration via web or Windows utility
- Complete packet analysis and diagnosis information for maintenance
- Easy I/O data maintenance via web interface
- microSD card for configuration and system log backup
- -40 to 75°C wide operating temperature models available
- Modbus port with 2 kV built-in isolation protection
- Built-in Ethernet cascading for easy wiring
Ethernet Interface |
Protocol |
EtherNet/IP, Modbus TCP |
Number of Ports |
2 (Ethernet cascade) |
Speed |
10/100 Mbps, Auto MDI/MDIX |
Connector |
8-pin RJ45 |
Magnetic Isolation Protection |
1.5 kV (built-in) |
• EtherNet/IP |
Class |
Adapter, Scanner |
CIP Objects Supported |
Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port |
Max. Number of Connections |
MGate as Adapter: 16 connections for read-only, 1 connection for read/write
MGate as Scanner: 100 connections |
Max. Total I/O Data Size |
Input: 2048 bytes (496 bytes per connection)
Output: 2048 bytes (496 bytes per connection) |
• Modbus |
Functions Supported |
1, 2, 3, 4, 5, 6, 15, 16, 23 |
Max. Number of Commands |
100 |
Max. Number of Connections |
MGate as Modbus TCP Master: 32 connections
MGate as Modbus TCP Slave: 16 connections |
Max. Total I/O Data Size |
Input: 2048 bytes
Output: 2048 bytes |
• Modbus Serial Interface |
Number of Ports |
1 |
Serial Standards |
RS-232/422/485, software selectable |
Connectors |
DB9 male |
Isolation |
2 kV (built-in) |
RS-485 Data Direction Control |
ADDC® (automatic data direction control) |
Pull High/Low Resistor for RS-485 |
1 KΩ, 150 KΩ |
Terminator for RS-485 |
120 Ω |
Data Bits |
5, 6, 7, 8 |
Stop Bits |
1, 1.5, 2 |
Parity |
None, Even, Odd, Space, Mark |
Flow Control |
RTS/CTS |
Baudrate |
50 bps to 921.6 Kbps |
• External Storage Drive |
Interface |
microSD |
Standard |
SDHC v2.0 |
• Serial Signals |
RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 |
Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w |
Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w |
Data+, Data-, GND |
• Software |
Operation Modes |
EtherNet/IP Adaptor/Scanner, Modbus RTU/ASCII/TCP Master/Slave |
Configuration Options |
Serial console, Windows utility |
Utilities |
MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64) |
Bonus Features |
QuickLink |
• Physical Characteristics |
Housing |
Metal (IP30) |
Weight |
507 g |
Dimensions |
36 x 105 x 140 mm (1.42 x 4.13 x 5.51 in) |
• Environmental Limits |
Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Altitude |
Up to 2000 m |
Note |
Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
• Power Requirements |
Input Voltage |
12 to 48 VDC |
Power Connector |
Terminal block |
Power Consumption |
455 mA @ 12 VDC, 125 mA @ 48 VDC |
• Standards and Certifications |
Safety |
UL 508, EN 60950-1 |
EMC |
CE, FCC |
EMI |
EN 55022 Class A, FCC Part 15 Subpart B Class A |
EMS |
EN 55024,
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,(PFMF) Level 3 |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-32 |
Vibration |
IEC 60068-2-6 |
• Reliability |
MTBF (mean time between failures) |
513,139 hrs |
• Warranty |
Warranty Period |
5 years |
| |