> >
 28.06.2013
| |
|
The high performance Grasshopper3 camera line combines the benefits of CCD with the affordability and data throughput of USB 3.0. Its FPGA and frame buffer-based architecture provides optimal reliability, a rich set of features, and a full image processing pipeline including color interpolation, gamma, and lookup table functionality. The Grasshopper3 offers a powerful, easy-to-use, and cost-effective alternative to Camera Link and dual GigE LAG solutions.
|
| GS3-U3-28S4C-C |
| GS3-U3-28S4M-C |
|
|
2.8 MP |
- Sony ICX687 CCD, 1/1.8", 3.69 µm
- Global shutter
- 1928 x 1448 at 26 FPS
|
| GS3-U3-28S5C-C |
| GS3-U3-28S5M-C |
|
|
2.8 MP |
- Sony ICX674 CCD, 2/3", 4.54 µm
- Global shutter
- 1920 x 1440 at 26 FPS
|
| GS3-U3-41C6C* |
| GS3-U3-41C6M* |
|
|
4.1 MP |
- CMOSIS CMV4000, 1", 5.5 µm
- Global shutter
- 2048 x 2048 at 90 FPS
|
| GS3-U3-60S6C-C |
| GS3-U3-60S6M-C |
|
|
6.0 MP |
- Sony ICX694 CCD, 1", 4.54 µm
- Global shutter
- 2736 x 2192 at 13 FPS
|
| GS3-U3-91S6C-C |
| GS3-U3-91S6M-C |
|
|
9.1 MP |
- Sony ICX814 CCD, 1", 3.69 µm
- Global shutter
- 3376 x 2704 at 9 FPS
|
* Available Q3 2013
Imaging Performance
(EMVA 1288) |
See the Imaging Performance Specification, which includes quantum efficiency, saturation capacity (full well depth), read noise, dark current, dynamic range and signal to noise ratio. |
| A/D Converter |
14-bit (10-bit GS3-U3-41C6) |
| Video Data Output |
8, 12, 16 and 24-bit digital data |
| Image Data Formats |
Mono8, Mono12, Mono16 (all models) RGB, YUV411, YUV422, YUV444, Raw8, Raw12, Raw16 (color models) |
| Partial Image Modes |
Pixel binning and region of interest (ROI) modes |
| Image Processing |
Gamma, lookup table, hue, saturation, and sharpness |
| Shutter |
Global shutter; Automatic/manual/one-push/extended shutter modes
0.03 ms to 30 seconds (extended shutter mode) |
| Gain |
Automatic/manual/one-push modes
0 dB to 24 dB GS3-U3-28S4/GS3-U3-28S5; -6.158 to 24 dB GS3-U3-60S6; -9 to 24 dB GS3-U3-91S6 |
| Gamma |
0.50 to 4.00, programmable lookup table |
| White Balance |
Automatic/manual/one-push modes |
| High Dynamic Range |
Cycle 4 gain and exposure presets |
| Color Processing |
On-camera in YUV or RGB format, or on-PC in Raw format |
| Digital Interface |
USB 3.0 interface with screw locks for camera control, data, and power |
| Transfer Rates |
5 Gbit/s |
| GPIO |
8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial I/O, 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins |
| External Trigger Modes |
Standard, bulb, overlapped, and multi shot trigger modes |
| Synchronization |
Via external trigger or software trigger |
| Image Buffer |
128 MB frame buffer |
| Memory Channels |
2 user configuration sets for custom camera settings |
| Flash Memory |
2 MB non-volatile memory |
| Dimensions |
44 mm x 29 mm x 58 mm excluding lens holder, without optics (metal case) |
| Mass |
90 grams (without optics or tripod mounting bracket) |
| Power Consumption |
5-24 V via GPIO or 5 V via USB 3.0 interface, maximum 4.5 W |
| Camera Control |
Via FlyCapture SDK or third party software |
| Camera Updates |
In-field firmware updates |
| Lens Mount |
C-mount |
| Temperature |
Operating: 0° to 50°C; Storage: -30° to 60°C |
| Compliance |
CE, FCC, RoHS |
| Operating System |
Windows, Linux (32- or 64-bit) |
| Warranty |
3 years |
|
| |
