> >
 16.10.2012 In order to meet the requirements of the most demanding high speed imaging applications a balance of high frame rate, image resolution, dynamic range and light sensitivity is required. The FASTCAM SA7 high speed camera system has been designed to provide a careful balance of all these sometimes conflicting requirements.
The compact size of the FASTCAM SA7 conceals powerful high speed imaging performance. A choice of two performance options provide frame rates of either 2,000 fps or 3,500 fps at 1280x1024 pixel image resolution with increased frame rates at reduced image resolution.
Innovative CMOS image sensor technology provides a level of high quality low noise images not previously available from high speed camera systems.
True 12bit ADC produces sharp, high contrast imaging to perfectly replicate the fine detail of subjects being recorded. Excellent light sensitivity and a 10 microsecond global electronic shutter allow the system to be employed in demanding imaging applications.
The 12.8 x 10.2mm sensor size allows the camera to be operated with 1 inch format C mount lenses and F mount lenses. The camera benefits from a sealed camera body construction allowing use in harsh environments without ingress of dust and other contamination. The camera's rugged and compact design (camera body size 151(5.9") x 102 (4.0") x 195 (7.7") mm) allows positioning in space limited locations and integration with other instrumentation systems.
| Sensor |
1280x1024 pixels, 10µm pixel size,12-bit ADC (Bayer system color, single sensor ) |
| Shutter |
Global electronic shutter from 16.6ms to 10µs independent of frame rate |
| Lens Mount |
C-mount, F-mount (compatible with Nikon G type lenses) |
| Memory |
4GB (2180 frames @ maximum resolution) or
8GB (4365 frames @ maximum resolution) memory options |
| Camera Control |
High speed Gigabit Ethernet |
| User Preset Switches |
One user selectable camera function controls mounted on the camera's rear panel |
| Low Light Mode |
Low light mode drops the frame rate and shutter time to their maximum values, while maintaining other set parameters, to enable users to position and focus the camera |
| Triggering |
Selectable positive or negative TTL 5Vp-p or switch closure |
| Timing |
Internal clock or external source |
| Phase Lock |
Enable cameras to synchronized precisely together to a master camera or external source |
| Trigger Modes |
Start, Center, End, Manual |
| Saved Image Formats |
JPEG, AVI, TIFF, BMP, RAW, RAWW, MRAW, PNG, MOV and FTIF. Images can be saved with or without image or comment data |
| Data Display |
Frame Rate, Shutter Speed, Trigger Mode, Date or Time, Status (Playback /Record), Frame Count and Resolution |
| Cooling |
Actively cooled |
| Operating Temperature |
0 - 40 degrees (32 - 104 degree F) |
| Mounting |
1 x 1/4 - 20 UNC, 1 x 3/8 - 16 UNC, 4 x M5 |
| Dimensions |
151mm (5.9")H×102mm (4.0")W×195mm (7.7")D |
| Weight |
3.6 kg (7.94 lbs) |
| Power Requirements |
100V-240V AC ~ 1.5A, 50-60Hz DC operation 22-32 VDC, 65VA |
| |
