RAID Controller 3Ware 9550SX-8LP 8-port SATA-300 (Serial ATA), RAID Levels: 0, 1, 5, 10, 50 & JBOD, BBU 190-301000, Low Profile (LP), PCI-X, p/n: 700-0188-04, OEM (контроллер)

3WARE 8 PORT SATA2 RAID CONTROLLER BULK HDR-3WR-955SX8B MFR Model: 9550SX-8LP 10PK

Description:

Mfr Part Number: 9550SX-8LP 10PK Features: 7th-generation StorSwitch point-to-point, non-blocking switched architecture On-board PowerPC RISC processor provides true hardware RAID - SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives Bootable array support for greater fault tolerance Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support 128MB DDR2-400 memory with ECC protection 32 pooled DMA channels Complete configuration management suite 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool 3ware Disk Manager 2 (3DM2) - browser-based management tool Features include: secure access via ssh or https, create unit, delete unit, remove unit, import unit, migrate unit, verify unit rebuild unit - Command Line Interface (CLI) - scriptable configuration tool SNMP support SMTP support for email/pager notification ATA-6 and Out of band (OOB) staggered drive spin-up support Auto carving allows logical units larger than 2TB to be divided into multiple units for legacy operating systems that are limited to a maximum of 2TB per logical unit StorSave platform for advanced performance tuning with the BBU Multiple logical unit sizes and RAID levels on one card Multiple card support within a system for large storage requirements Hot-swap and hot-spare support for data availability Dynamic sector repair for robust data protection S.M.A.R.T. disk drive monitoring for reliability Emergency Flash Recovery protects against failed firmware upgrade Drive activity LED support Online Capacity Expansion and RAID Level Migration Battery Backup Unit (BBU) ready Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal Drive insertion and removal notification PCI-X 1.0b (and PCI 2.3) compliant 64-bit/133/100/66MHz bus master Serial ATA 2.5 Specification support BIOS PnP (plug and play) and BBS (BIOS boot specification) support Power Requirements: 3.5 ~ 10W @ 3.3 V (depending on configuration) Form Factor: Half-length, Low-profile Port Count: 8 Supports RAID Levels: 0, 1, 10, 5 Host Interface: PCI-X Host Interface Speed: 64-bit / 133MHz Onboard Memory: 128 MB Connector Type: Discrete Operating System Support: Microsoft Windows 2003/XP/2000, Red Hat Linux, SuSE Linux, Fedora Linux, 2.4 Linux kernel, 2.6 Linux kernel, FreeBSD, 32/64-bit support Package Include (10-Pack): 10x Individually Poly-bagged 9550SX-8LP SATA2 RAID Cards, 1x CD Containing Drivers, 3DM2 Disk Management Software And Documentation Dimension (LxH): 7.475 x 2.536 inch / 18.987 x 6.441 cm