Цена: 119975 руб.
Товар на складе: есть
Плата ввода-вывода информации Data Translation DT333 Analog Output Card, 4 Channel 16-bit Analog Output, 32 digital I/O lines, PCI/w 2 meter cable.
The DT330 Series is a family of four low-cost analog output and digital I/O boards for the PCI bus. Ideal for applications requiring multiple D/A outputs and control capabilities, the DT330 Series offers four or eight analog outputs as well as 32 digital I/O lines.
Analog Outputs Provide Flexibility
Available with four or eight analog outputs at 12- or 16-bit resolution, the DT330 Series analog outputs can be updated through programmed I/O at slow speeds (actual speed is dependent on the PC, typical rate: 1–10 kS/s). The DT331 and DT332 have 12-bit analog outputs that can be set through software for ranges of ±10 V, 0–10 V, ±5 V, or 0–5 V. The DT333 and DT334 have 16-bit analog outputs with a fixed range of ±10 V.
32 Digital I/O Channels for High
Each DT330 Series board provides 32 digital I/O lines, grouped into four 8-bit ports. You can program each port for either input or output. Digital outputs are capable of driving solid-state relays (sink 24 mA and source 15 mA). The DT330 Series boards can generate an interrupt when any of the eight digital I/O lines corresponding to one of the 8-bit digital ports changes state. This feature is useful hen you want to monitor critical signals or when you want to signal the host computer to transfer data to or from the board. You can enable the interrupts on a bit-by-bit basis on this port.
Easy User Connections
All signals are brought out to a dedicated 68-pin connector on the backplate of the DT330 Series board. The STP68 screw terminal panel is available to simplify connections. The EP305 cable connects the DT330 Series board to the STP68 screw terminal panel.
As you develop your application, technical support is available when you need it. Extensive information is available 24 hours a day, including drivers, example code, bug fixes, pinouts, a searchable KnowledgeBase, and much more. Support is also available from your point of purchase. Telephone support is free for the first 90 days; you can also request complimentary support via e-mail or fax at any time. Additional support options are available; contact your Data Translation representative for details.
Cross-Series Compatibility Saves Programming Time, Protects Your Investment
Virtually all Data Translation data acquisition boards, including the DT330 Series, are compatible with the DT-Open Layers software standard. This means that if your application was developed with one of Data Translation’s software products, you can easily upgrade to a new Data Translation board, now or in the future. Little or no reprogramming is needed. For example, if you are currently using a Data Translation DT2815 data acquisition board, upgrading to a DT330 Series board is simple – just load the new drivers and you’re done.
■ Four different board configurations provide a range of flexible, cost-effective options.
■ Four or eight analog outputs with 12- or 16-bit resolution.
■ 32 digital I/O lines for non-clocked monitoring or control of high channelcount applications.
■ Interrupt on bit change detection for monitoring critical signals.
■ Supported by DT Measure Foundry, test and measurement application builder software that lets you easily create complex measurement applications.
У нас Вы можете купить со склада В Москве и под заказ жесткие диски, модули памяти, процессоры, блоки питания, видеокарты и другие комплектующие для серверов и компьютеров.