Network Ethernet card Compaq/Intel NC3134 Dual 10/100 I-base board No. 010388-001, SP#161105-001, AS#010555-001 , DG#010387-000, PCI-X, OEM (сетевой адаптер)

Network card Compaq NC3134 Dual 10/100 I-base board

Models
Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Base 10/100	138603-B21
With this Fast Ethernet server adapter and the optional upgrade modules, Compaq is the only provider of an industry-standard, flexible transition path from Ethernet to Fast Ethernet to Bonded Fast Ethernet to Gigabit.
Optional Upgrade Modules for use with the NC3134 or NC3131:
NC6133 1000 LX Upgrade Module	338456-B24
NC6132 1000 SX Upgrade Module	338456-B23
NC3135 Dual 10/100 Upgrade Module	138604-B21
NC3133 100 FX Upgrade Module	338456-B25
NC3132 Fast Ethernet Dual 10/100 Upgrade Module	338456-B22
Fast Ethernet Server Adapters:
NC3131 Fast Ethernet NIC 64 PCI Dual Base 10/100	338456-B21
NC3123 PCI, 10/100 WOL	174830-B21
Gigabit Server Adapters:
Compaq NC7132 10/100/1000-T Upgrade Module	153543-B21
NC7131 Gigabit Server Adapter, PCI, 64/66, 10/100/1000-T	158575-B21
NC6136 Gigabit Server Adapter PCI, 64/66, 1000-SX	203539-B21

Introduction

Compaq ships the industry's only modular network interface controller that provides a scalable transition path from Ethernet to Fast Ethernet to Bonded Fast Ethernet to Gigabit network connections. The Compaq NC3134 Fast Ethernet server adapter includes two 10/100 BASE-TX ports with optional upgrade modules for two additional 10/100 BASE-TX ports, a 100 FX port, or a Gigabit port. The NC3134 provides a cost-effective transition for server adapter upgrades. Its modular design enables additional fault-tolerant redundancy and the ability to upgrade to higher network performance without having to replace the base adapter.

Performance
64-bit/66-MHz Bus Support	Efficient data transfer between the network and PC is essential for high-performance and low CPU utilization. The NC3134 includes a 32/64-bit PCI Universal Connector to work in either 32- or 64-bit bus slots, and it supports both 33- and 66-MHz bus speeds.

Port Bonding

Transmit Load Balancing (TLB) and Switch-Assisted Load Balancing (FEC/GEC/802.3ad static mode configuration only) are two port bonding methods supported by the NC3134. TLB provides both failover and balancing of transmit traffic across all adapters for increased performance. For even higher performance, Switch-Assisted Load Balancing (SLB) provides port failover and balancing of both transmit and receive traffic across all adapters when connected to a switch that supports this feature.

Bus-Mastering	The NC3134 uses bus-mastering technology to maximize throughput and minimize CPU utilization.

Performance Enhancements	The NC3134 supports Interrupt Coalescence in all the major OS environments, reducing CPU utilization. The NC3134 also provides Receive Checksum Offload capabilities when it runs in a WindowsÒ 2000 environment.