The LP952L provides high-performance Fibre Channel connectivity for entry-level Windows Server 2003, Windows 2000, Windows NT, Linux and NetWare systems. Based on the Emulex LP9002 architecture, the LP952L provides a unique combination of features, including fabric support using F_Port and FL_Port connections, full-duplex data transfers, high data integrity features, support for all Fibre Channel topologies and support for service class 2 and 3.
The LP952L also features sophisticated hardware that provides superior performance in storage area networks, delivering low latency and high throughput in fabric, arbitrated loop and clustered environments.
STANDARDS
Current ANSI Fibre Channel: FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FCP-2 and RFC 2625 (IP over FC).
Legacy standards also supported: FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-AL, FC-FLA, FC-PLDA, FC-TAPE, and FCP.
PCI local bus revision 2.2 (see power requirements)
Fibre Channel Class 2, 3
PHP hot plug - hot swap
ARCHITECTURE
Emulex Centaur ASIC technology up to 66MHz PCI bus master DMA
512KB FLASH memory
256KB code RAM
128KB buffer RAM
SOFTWARE ENVIRONMENTS
Windows Server 2003
Windows 2000
Windows NT
Linux
NetWare
HARDWARE ENVIRONMENTS
x86 PCI hardware platforms
3.3 or 5v tolerant signaling
OPTICAL
Data rates:
1.0625/2.125Gb/s
Optics:
short wave lasers
Cable:
50/125µm, multi-mode fiber
62.5/125µm, multi-mode fiber
Connector: LC
Distance: (1Gb/s)
500 meters (1,640') 50/125 µm fiber
300 meters (984') 62.5/125 µm fiber
(2Gb/s)
300 meters (984') 50/125 µm fiber
150 meters (492') 62.5/125 µm fiber
PHYSICAL DIMENSIONS
Short, low profile MD2 form factor
167.64mm x 64.41mm (6.60" x 2.54")
Standard or low profile bracket
POWER REQUIREMENTS
(PCI-X 133 MHZ)
Volts: +3.3 VDC (± 5%)
Power: 7.2 watts typical (9.3w max)
ENVIRONMENTAL CONDITIONS
Operating temperature:
0° to 45°C (32° to 113°F)
Airflow required: 100 LF/m
Storage temperature:
-10° to 55°C (-14° to 131°F)
Relative humidity:
5% to 95% non–condensing
AGENCY APPROVALS
Class 1 Laser Product
per DHHS 21CFR (J) & EN60825
UL recognized to UL 1950
CUR recognized to CSA22.2, No. 950
TUV certified to EN60950
FCC rules, Part 15, Class A
ICES–003, Class A
EMC Directive 89/336/EEC (CE Mark)
-EN55022, Class A
-EN55024
Australian EMC Framework (C–Tick Mark)
-AS/NZS 3548, Class A
VCCI, Class A
