Streamer Hewlett-Packard (HP) Q1545A, Ultrium215 (LTO-1), 100/200GB, 7.5/15 Mb/s, external tape drive Half-height, OEM (стример)

Streamer Hewlett-Packard (HP) Q1545A, Ultrium215 (LTO-1), 100/200GB, 7.5/15 Mb/s, external tape drive Half-height

StorageWorks Ultrium - Идеальное решение для создания резервных копий на рабочих местах, где высокая производительность и низкая цена являются критическими параметрами. Стриммеры формата Ultrium смогут сохранить 200 Гб сжатых данных на один носитель со скоростью до 54 Гб в час. Несмотря на его низкую цену, стриммер Ultrium 215 предоставляет превосходную надежность, и включает многие из передовых особенностей старших моделей этого стандарта. Восстановление потерянных данный производится нажатием одной кнопки. Ultrium 215 особенно подходит для компаний, работающих с большими объемами информации, потеря которой была бы критичной для их деятельности. Ultrium 215 - идеальное решение для средних серверов.

	External
Ёмкость:	100 ГБ (не сжатых данных) 200 ГБ (сжатых данных)
Скорость передачи данных:	до 15 MB/s
Скорость поиска:	около 142 секунд для 100ГБ катриджа
Интерфейс:	Wide Ultra2 SCSI (LVDS)
Форматы записи:	LTO Ultrium 1
Среднее время наработки на отказ:	250 000 часов (при 100% загрузке)
Габариты: (см)	7.0 x 20.8 x 29.2
Вес (кг):	4.65
Объем буфера:	16 MB
Используемые картриджи:	LTO Ultrium1
Номер:	Q1545A
Совместимость:	Microsoft® Windows, Novell NetWare, HP-UX, Linux Kernel, Red Hat Linux 64-bit, IBM-AIX, Sun Solaris, Intel® Solaris, SGI IRIX, и другие операционные системы.

Models

Ultrium 215 Tape Drive	Ultrium 215, Internal (carbon) *NOTE: 0D1 will appear after this part number on your sales order if factory integration is indicated.	Q1543A*
	Ultrium 215, External (carbon)	Q1545A
	Ultrium 215, Array Module (carbon) NOTE: Offline hot-swap tape drive for HP StorageWorks Tape Array 5300. *NOTE: 0D1 will appear after this part number on your sales order if factory integration is indicated.	C7492B*
	Ultrium 215 Rack-mount (carbon) NOTE: Single drive installed in a 3U Rack-mount kit.	350544-B21

Ultrium 230 Tape Drive	Ultrium 230, Internal (carbon) *NOTE: 0D1 will appear after this part number on your sales order if factory integration is indicated.	Q1515A*
	Ultrium 230, External (carbon)	Q1517A
	Ultrium 230, Array Module (carbon) NOTE: Offline hot-swap tape drive for HP StorageWorks Tape Array 5300 *NOTE: 0D1 will appear after this part number on your sales order if factory integration is indicated.	C7470B*
	Ultrium 230 Rack-mount (carbon) NOTE: Single drive installed in a 3U Rack-mount kit	350545-B21

Ultrium 460 Tape Drive	Ultrium 460, Internal (carbon) *NOTE: 0D1 will appear after this part number on your sales order if factory integration is indicated.	Q1518A*
	Ultrium 460, External (carbon)	Q1520A
	Ultrium 460, Array Module (carbon) NOTE: Offline hot-swap tape drive for HP StorageWorks Tape Array 5300. *NOTE: 0D1 will appear after this part number on your sales order if factory integration is indicated.	Q1512B*
	Ultrium 460 Rack-mount (carbon) NOTE: Single drive installed in a 3U Rack-mount kit.	350546-B21

Specifications

		Ultrium 215	Ultrium 230	Ultrium 460
Dimensions	Form Factor	5¼-inch half-height	5¼-inch full-height	5¼-inch full-height
	Physical (HxWxD) Internal	1.6 x 5.7 x 8.9 in (4.0 x 14.5 x 22.5 cm)	3.3 x 5.7 x 8.2 in (8.5 x 14.5 x 20.7 cm)	3.3 x 5.7 x 8.2 in (8.5 x 14.5 x 20.7cm)
	Physical (HxWxD) External	2.75 x 8.19 x 11.5 in (7.0 x 20.8 x 29.2 cm)	4.8 x 8.2 x 11.5 in (12.2 x 20.8 x 29.2 cm)	4.8 x 8.2 x 11.5 in (12.2 x 20.8 x 29.2 cm)
	Physical (HxWxD) Array Module	1.7 x 6.3 x 11.2 in (4.3 x 16 x 28.5 cm)	3.3 x 6.1 x 11.2 in (8.5 x 15.5 x 28.5 cm)	3.3 x 6.1 x 11.2 in (8.5 x 15.5 x 28.5 cm)
	Physical (HxWxD) Rack-mount	5.2 x 16.8 x 23.0 in (13.2 x 42.7 x 58.4 cm)	5.2 x 16.8 x 23.0 in (13.2 x 42.7 x 58.4 cm)	5.2 x 16.8 x 23.0 in (13.2 x 42.7 x 58.4 cm)
	Shipping (HxWxD) Internal	11.4 x 17.7 x 12.2 in (29.0 x 45.0 x 31.0 cm)	13.4 x 17.7 x 12.2 in (34.0 x 45.0 x 31.0 cm)	13.4 x 17.7 x 12.2 in (34.0 x 45.0 x 31.0 cm)
	Shipping (HxWxD) External	15.4 x 18.7 x 15.4 in (39.0 x 47.5 x 39.0 cm)	15.2 x 18.7 x 15.2 in (38.5 x 47.5 x 38.5 cm)	15.2 x 18.7 x 15.2 in (38.5 x 47.5 x 38.5 cm)
	Physical (HxWxD) Array Module	11.4 x 17.7 x 12.2 in (29.0 x 45.0 x 31.0 cm)	13.4 x 17.7 x 12.2 in (34.0 x 45.0 x 31.0 cm)	13.4 x 17.7 x 12.2 in (34.0 x 45.0 x 31.0 cm)
	Shipping (HxWxD) Rack-mount	15.75 x 23.75 x 33.5 in (40.0 x 60.3 x 85.1 cm)	15.75 x 23.75 x 33.5 in (40.0 x 60.3 x 85.1 cm)	15.75 x 23.75 x 33.5 in (40.0 x 60.3 x 85.1 cm)

Weight	Out of box, Internal	3.2 lb (1.45 kg)	4.4 lb (2.0 kg)	4.6 lb (2.1 kg)
	Out of box, External	10.3 lb (4.65 kg)	11.8 lb (5.35 kg)	11.8 lb (5.35 kg)
	Out of box, Array Module	4.1 lb (1.85 kg)	6.3 lb (2.85 kg)	6.4 lb (2.9 kg)
	Out of box, Rack-mount	30.5 lb (13.9 kg)	31.2 lb (14.2 kg)	31.6 lb (14.4 kg)
	Shipping, Internal	7.9 lb (3.6 kg)	7.7 lb (3.5 kg)	7.7 lb (3.5 kg)
	Shipping, External	17.6 lb (8.0 kg)	15.9 lb (7.2 kg)	15.87 lb (7.2 kg)
	Shipping, Array Module	8.8 lb (4.0 kg)	9.5 lb (4.3 kg)	9.5 lb (4.3 kg)
	Shipping, Rack-mount	52 lb (24 kg)	56 lb (25 kg)	56 lb (25 kg)

Capacity	Native	100 GB	100 GB	200 GB
	Compressed (assumes 2:1 data compression)	200 GB	200 GB	400 GB
	Buffer Size	16 MB	16 MB	64 MB
Performance	Sustained transfer rate, native	7.5 MB/s	15 MB/s	30 MB/s with Ultrium 2 media 20 MB/s with Ultrium 1 media
	Sustained transfer rate, compressed (assumes 2:1 data compression)	15 MB/s	30 MB/s	60 MB/s with Ultrium 2 media 40 MB/s with Ultrium 1 media
	Burst transfer rate	80 MB/s (with Ultra2 SCSI wide)	80 MB/s (with Ultra2 SCSI wide)	160 MB/s (with Ultra3 SCSI wide)
	Data rate matching range	6-7.5 MB/s (native)	6-15 MB/s (native)	10-30 MB/s (native)
	Data access time (from BOT)	142s typical for a 100 GB tape (native)	71s typical for a 100 GB tape (native)	46s typical for a 200 GB tape (native)
	Average load time	25 s	25 s	19 s
	Average unload time	13 s	13 s	13 s
	Rewind time from EOT	284 s (100 GB tape)	142 s (100 GB tape)	88 s (200 GB tape)
	Rewind tape speed	2.05 m/s	4.1 m/s	7.0 m/s
Reliability	MTBF	250,000 hours at 100% duty cycle	250,000 hours at 100% duty cycle	250,000 hours at 100% duty cycle
	Uncorrected Error Rate	1x10 17 bits read	1x10 17 bits read	1x10 17 bits read
Media Compatibility		LTO Ultrium1 with 4K Cartridge Memory	LTO Ultrium1 with 4K Cartridge Memory	LTO Ultrium 2 with 4K Cartridge Memory LTO Ultrium1 with 4K Cartridge Memory

Tape Format	Recording method	8-channel linear serpentine	8-channel linear serpentine	8-channel linear serpentine
	Recording format	LTO Ultrium 1	LTO Ultrium 1	LTO Ultrium 2 LTO Ultrium 1
	Data compression	LTO DC dual mode compression (an enhanced version of ALDC)	LTO DC dual mode compression (an enhanced version of ALDC)	LTO DC dual mode compression (an enhanced version of ALDC)
	Error detection/correction	Reed-Solomon	Reed-Solomon	Reed-Solomon
	Data encoding method	Partial Response Maximum Likelihood (PRML)	Partial Response Maximum Likelihood (PRML)	Partial Response Maximum Likelihood (PRML)
Interface	Interface type	Wide Ultra2 SCSI (LVDS)	Wide Ultra2 SCSI (LVDS)	Wide Ultra3 SCSI (LVDS)
	SCSI connector	Internal: 68-pin LVDS External: 68-pin HD LVDS Array module: 80-pin SCA (SCSI and power)	Internal: 68-pin LVDS External: 68-pin HD LVDS Array module: 80-pin SCA (SCSI and power)	Internal: 68-pin LVDS External: 68-pin HD LVDS Array module: 80-pin SCA (SCSI and power)

Power Specifications		Ultrium 215	Ultrium 230	Ultrium 460
	Power requirements, Internal (including rack-mount model)	+5V@3.0A (typical) +5V@3.5A (max) +12V@0.5A (typical) +12V@2.5A (max)	+5V@3.5A (typical) +5V@4.0A (max) +12V@1.0A (typical) +12V@1.9A (max)	+5V@3.5A (typical) +5V@4.0A (max) +12V@1.0A (typical) +12V@3.0A (max)
	Power requirements, External	100 to 240 VAC, 50-60 Hz, auto-ranging, 0.7A max	100 to 240 VAC, 50-60 Hz, auto-ranging, 0.7A max	100 to 240 VAC, 50-60 Hz, auto-ranging, 0.7A max
	Power requirements, Array Module	+5V@3.0A (typical) +5V@3.5A (max) +12V@0.5A (typical) +12V@2.5A (max)	+5V@3.5A (typical) +5V@4.0A (max) +12V@1.0A (typical) +12V@1.9A (max)	+5V@3.5A (typical) +5V@4.0A (max) +12V@1.0A (typical) +12V@3.0A (max)
	Power consumption	10 Watts idle 19 Watts typical 38 Watts max	11 Watts idle 21 Watts typical 32 Watts max	11 Watts idle 25 Watts typical 38 Watts max

Environmental Specifications	Temperature range	Operating: 50° F to 95° F (10° C to 35° C)
		Storage: -40° F to 151° F (-40° C to 66° C)
	Non-condensing humidity range	Operating: 20 to 80% RH (non-condensing)
		Storage: 10 to 95% RH (non-condensing)

Standards Compliance

CSA Certification to C22.2, No. 950 Amd 4, UL Listed to UL 1950 Amd 4, TÜV EN60950 (IEC 950), CE Declaration of Conformity CE 73/23/EEC (amended by 93/68/EED), FCC 47 CFR Parts 2 & 15 with reference to ASNSI C63.4:1992 (CISPR 22:1985 with amendments); C-TICK Approved (AS/NZS 3548), RRL Approved (RRL MIC No. 1996-18), GOSH CB report with deviations; BQIQ Approved (CNS 13438)

Front Panel LED Indicators	Ready (top light, green) This LED indicates power on or activity.	On, steady	The drive is ready for use. It is powered up but not doing anything.
		On, flashing	The drive is busy. For example: it is carrying out Write, Read, Self Test or firmware download.
		Flashing pattern	The drive is in OBDR mode.
		Off	The drive power is off or there was a failure during self-test.
	Drive Error (second light, amber) This LED indicates a drive error.	Off	No fault has been detected.
		On, flashing	The drive has suffered an unrecoverable hardware failure. A power cycle or a successful tape load will turn off the LED, but if the hardware fault is still present it will come on again if the same operation is performed.
	Tape Error (third light, amber) This LED indicates a tape error.	Off	No fault has been detected.
		On, flashing	The tape currently in the drive is faulty. This LED could come on for a number of reasons, but they all relate to the tape being in error in some way, such as unreadable cartridge memory or unsupported tape. Do not use the cartridge; replace it. The LED will go out when a tape load is started.
	Use Cleaning Cartridge or Clean (bottom light, amber) This LED indicates when a cleaning tape should be used.	On, steady	A cleaning cartridge is being used. The Ready light will also flash.
		On, flashing	The drive needs cleaning. The light will continue to flash if the drive is power cycled, and will only go out after a supported cleaning tape has been used.
		Off	The drive does not require cleaning.